Six cable lines for network & energy infrastructure.
Every product is manufactured at the Netcable factory with layered quality control. The specifications below are standard configurations, all can be customised to tender requirements.
LAN Cable (Cat 5e & Cat 6)
Cat 5e & Cat 6 for enterprise backbone connectivity with stable gigabit transmission. 99.9% pure copper with LSZH jacket option for high-rise installations.
- Construction
- 4-pair UTP/FTP, Solid Bare Copper
- Conductor
- 23/24 AWG
- Jacket
- LSZH / PVC
- Bandwidth
- 100 MHz (Cat 5e) / 250 MHz (Cat 6)
- Transmission
- 1 Gbps (Cat 5e) / 10 Gbps (Cat 6)
- Operating Temp
- -20°C to +75°C
- ·0199.9% pure bare copper
- ·02LSZH flame-retardant jacket option
- ·03Shielded anti-EMI variant
- ·04Custom jacket colors available
Fiber Drop Wire
FTTH last-mile cable with galvanized steel messenger wire for aerial installation from pole to subscriber ONT. Bend-insensitive for tight-corner routing.
- Construction
- 1-core / 2-core, bend-insensitive
- Fiber Type
- G.657.A1 / G.657.A2 Single-Mode
- Strength Member
- 0.8 / 1.0 / 1.2 mm Steel Wire
- Jacket
- LSZH / PE, UV-resistant black
- Tensile Load
- ≥ 1000 N
- Operating Temp
- -40°C to +70°C
- ·01Self-supporting steel messenger
- ·02Bend-insensitive G.657 fiber
- ·03UV-resistant black jacket
- ·04Field-splice friendly
Fiber Outdoor (GYTS/GYTA53/GYFTY)
Outdoor backbone cable with corrugated steel-tape armor for impact, rodent, and harsh environmental protection.
- Construction
- GYTS / GYTA53 / GYFTY, loose tube
- Fiber Type
- 2–144 core G.652.D
- Armoring
- Corrugated steel tape
- Strength Member
- Central steel wire
- Tensile Load
- ≥ 3000 N
- Operating Temp
- -40°C to +70°C
- ·01Armored impact protection
- ·02Anti-rodent and anti-crush
- ·03Water-blocking gel in loose tubes
- ·04Outdoor UV-resistant PE jacket
ADSS (All-Dielectric Self-Supporting)
All-Dielectric Self-Supporting: 100% metal-free aerial cable reinforced with aramid yarn for long spans near PLN high-voltage lines.
- Construction
- All-dielectric, double jacket
- Fiber Type
- 6–144 core G.652.D / G.657
- Strength
- Aramid yarn (Kevlar)
- Jacket
- PE / AT (anti-tracking)
- Span
- Up to 300m+ (long-span available)
- Tensile Load
- ≥ 10 kN
- ·01100% metal-free (lightning-safe)
- ·02Aramid yarn for high-tension spans
- ·03AT jacket for HV-zone deployment
- ·04Long span without messenger wire
OPGW (Optical Ground Wire)
Optical Ground Wire: dual-function lightning shield + fiber optic transmission for PLN high-voltage tower grid networks.
- Construction
- Stainless steel tube + ACS / AC strands
- Fiber Type
- 12–72 core G.652.D
- Strength
- Aluminum-clad steel wires
- Tensile Load
- ≥ 70 kN
- Short-Circuit Capacity
- 50–200 kA²·s
- Operating Temp
- -40°C to +85°C
- ·01Dual function: grounding + telecom
- ·02High short-circuit current capacity
- ·03Extreme weather & wind tolerance
- ·04ACS strands for conductivity
FTTH Accessories
Complete passive optical equipment: ODB, splice closure, PLC splitter, patch cords, and pigtails for end-to-end PON distribution.
- Components
- ODB · Splice Closure · PLC Splitter · Patch Cord · Pigtail
- Material
- ABS / PC engineering, Stainless steel
- Rating
- IP65 / IP67 waterproof
- Wavelength
- 1310 / 1490 / 1550 nm
- Splitter Ratio
- 1:2 / 1:4 / 1:8 / 1:16 / 1:32 / 1:64
- Operating Temp
- -40°C to +70°C
- ·01IP65-sealed outdoor ODB
- ·02High-seal splice closures
- ·03Low-loss PLC splitters
- ·04SC/LC/FC/ST patch cords
Need a custom configuration?
Our engineering team prepares datasheets, test certificates, and factory pricing per tender specification within 24 working hours.